Routine Maintenance Of Commercial Water Dispensers

Do not install the water dispenser in a humid environment. Even with a stainless steel casing, it is still recommended not to install the water dispenser in a humid environment after purchase. Firstly, prolonged exposure to humidity will damage the material of the water dispenser. Secondly, constant humidity can cause circuit breaker tripping and sudden power outages at the power switch, reducing the lifespan of the water dispenser.

 

Replace the built-in filter regularly. Water dispenser built-in filters typically have 3 to 5 stages of filtration. It is generally recommended to replace the built-in filter every 6 months. Our Filter-in-Filter school water dispensers all have a filter replacement reminder function. The machine will automatically remind you when the filter needs replacing. Replace it promptly after the reminder to avoid affecting the taste of the water. Timely filter replacement also extends the machine's lifespan.

 

Do not arbitrarily adjust the thermostat. Before using the water dispenser, fill it with water and then connect the power. Do not arbitrarily adjust the thermostat to prevent setting it above the boiling point. The filter-in-filter water dispenser has an anti-dry-burning function, and each dispenser is pre-tested and installed before leaving the factory.

 

Therefore, after receiving the product, simply follow the installation instructions to turn on the water and electricity. It will automatically fill with water and enter working mode after connecting the water and power supply.

 

Additionally, please note that during use, do not remove the grounding wire of the water dispenser, as grounding is the last line of defense against electric shock.